OUR PRODUCTS
Agricultural Pipes
Synchro Piping Systems offers an extensive range of agriculture PVC-U pressure pipes. These pipes are designed specifically for varied pressure and gravity flow applications in agriculture, irrigation, swimming pool applications, and domestic water supply
Agriculture PVC-U pressure pipes offer significant advantages. They are light in weight, easy for transportation and installation, and have a high flow rate. High resistance to chemicals and corrosion ensures an extended product life.
Stringent quality assurance approach across all stages of manufacturing gives the product a high degree of reliability and a preferred choice for farmers, government institutions, domestic and commercial establishments and quality conscious people.
Agriculture PVC-U pipes are manufactured in a wide range of sizes and pressure classes conforming to standard IS 4985:2000. These agriculture water pipes are available in sizes ranging from 20 to 400 mm in different pressure classes. They are available in solvent cement joint.
BENEFITS
Our Products
Features
01
High tensile and impact strength
02
Freedom from toxicity, odours and tastes
03
Low thermal Expansion
01
UV Resistant
02
Consitent product quality
03
High Pressure Bearing Capacity
01
Fire retardant
02
No corrosion, leakage, scaling and pitting
03
Lowest bacterial
Application
Advantages
Light weight, easy to transport, store, handle and install.
Compared to G.I. pipes of the same size, No clogging & saves operational cost.
Quick to install, solvent cement based jointing system.
Corrosion resistance – uPVC is rustproof material therefore, bore diameter remains constant, ensuring constant flow over its lifetime.
Long working life
STANDARDS, QUALITY CONTROL & TESTING
The manufacturing and testing is done for Pipes in accordance with IS: 4985 – 2000.
All pipes, except non-pressure pipes are tested for potable water supplies in accordance with their relevant standards and as per the test methods given in IS: 12235.
All pipes, except non-pressure pipes are tested for potable water supplies in accordance with their relevant standards and as per the test methods given in IS: 12235.
Density Test
100%
Hydrostatic Pressure Test
100%
Drop Dart Impact test
100%
Tensile Test
100%
Compression Test
100%
Vicat Softening Test
100%
MDC test
100%
Coefficient Comparison
|
Pipe Material
|
Flow Coefficient
|
|---|---|
|
PVC
|
150
|
|
A.C.
|
130
|
|
G.I.
|
110
|
|
C.I.
|
100
|
Pipe Categories
DO’s & DONT’s
uPVC AGRI PIPES INSTALLATION GUIDELINE
|
METHOD
|
DO'S
|
DONT'S
|
||
|---|---|---|---|---|
|
CUTTING
|
It is imperative to mark the pipe from all sides so that pipe is cut with the help of a hand saw. It should be a right angle cutfrom all the sides. The cut piece should not be with burr on edge.
|
|
Do not cut/slant unevenly.
|
|
|
Deburring and Ridge Removal
|
After cutting, the pipe needs to be chamfered from the outer sides. It is advisable to provide approximately 2mm wide,150chamfer on spigot end.
|
|
Do not proceed with installation of pipe without chamfering
|
|
|
||||
|
Cleaning
|
Thoroughly clean the pipe with dry cloth where the solvent cement is going to be applied to avoid dust, dirt, oil, moistureand other foreign materials during the installation process.
|
|
Do not join the pipes without cleaning the pipe ends
|
|
|
Pipe Joining
|
Mark the pipe length to be inserted for jointing. Apply a liberal coat of solvent cement with the help of the brush on the marked surface.
|
|
Do not apply excess solvent cement on the pipe and do not use solvent cement by hand.
|
|
|
Push the pipe inside the fitting / pipe so that it goes inside equally from all the sides. Wipe off excess solvent cement that comes out from all the edges. Hold the joint for one to two minutes so that the jointing is perfect.
|
|
Do not use a hammer or half push the pipe.
|
||
Pipe Specifications
|
Material
|
Color
|
Reference Standards
|
Working Pressure (kg/cm2)
|
End Connections
|
|---|---|---|---|---|
|
Unplasticized Polyvinyl Chroride (uPVC)
|
Dark / Light Grey
|
IS 4985 : 2000
|
2.5, 4, 6, 8, 10 & 12.5
|
Solvent sockets
|